IP68
Sealed
IP68 or better, for indoor and outdoor plant use.
EQUIPMENT TAG + CMMS
Scan it.
Know it. Fix it.
Developed for chemical plants. One rugged RFID and QR tag on every piece of equipment, linked to Thingple CMMS for its full history, open work orders and documents. Used at BASF.
THE TAG
Built for
chemical sites.
A passive HF RFID chip and a black-on-white QR code in one anti-static tag. If one read fails, the other works.
20+ years
Service life
Designed for at least 20 years in service, and resistant to UV.
−20 to 85 °C
Temperature range
Operating and storage range.
100,000+
Rewrite cycles
The tag memory can be rewritten at least 100,000 times.
- TechnologyHF 13.56 MHz, passive, ISO/IEC 15693, NFC-V, NDEF text format
- Memory2,048-bit EEPROM and 64-bit ROM
- On metalReads when fixed to metal and concrete surfaces
- HandheldsRead by Android 7.0 and later handhelds, including ex-proof models
- SafetyAnti-static, explosion-protected design for Ex-zone use
- QR codeModel 2, printed black on white for reliable scanning
- Size and fixing100 × 35 mm; cable tie or industrial adhesive
- SupplyBlank, or printed and encoded from your equipment list
THE SOFTWARE
Thingple CMMS
Maintenance management for chemical and materials plants. Deployed single-tenant on your own private cloud, so equipment and repair data stay yours.
Equipment library
Category, type, maker, model, serial, site, cost and ERP codes in one record, with manuals and safety documents attached.
Work orders
Auto-numbered, prioritised by urgency and assigned to the right technician, who is notified by email.
Maintenance history
Notes, photos and video, with the handheld's GPS position, logged against the equipment.
People and skills
A technician roster with trades, certificates and the sites each person serves.
Handheld app
An Android app that scans the tag, finds the equipment by GPS and site, and opens its work order.
Predictive maintenance
Add vibration sensors and LoRa gateways to bind live IoT data to each asset.
From the field to the office in four steps
- Fix. Fit the tag and scan it once to bind it to the equipment.
- Confirm. Scan again on site. GPS suggests the site, and the equipment details fill in.
- Repair. The work order shows the cause and the repair instructions.
- Record. Photos and notes go straight into the equipment history.
GET STARTED
Start with
a pilot.
Tags, handhelds and CMMS are supplied and supported as one package, quoted for your site.
Tell us about your plant
Share how many pieces of equipment you manage and where they are. We recommend the tag type and fixing method.
Run a pilot
A set of tags, one or two handhelds and a CMMS instance for one area. Test readability, fit and workflow on your own equipment.
Roll out
Tags supplied in installation order, then CMMS extended site by site.
DOWNLOADS
The one-page flyer.
Share it with your maintenance and procurement teams.
Download the English flyer (PDF)
Download the Chinese flyer (PDF)TALK TO US
Ready to tag
your equipment?
Tell us about your site and we will propose a pilot.
Email info@thingple.com ↗